Brand
PHILLIPS
Model
BTA
Stock #
HSD1170
Condition
Used
Year
1981
Location
Lake Bluff, Illinois
United States
| Drilling Diameter, Maximum | 4” |
| Drilling Depth, Maximum | 48” |
| Feed Rate | .5 to 12 IPM |
| Swing Over Ways | 20” |
| Swing Over Work Surface | 32” |
| Spindle Speeds | Variable (Parker DC VS Drive) |
| Spindle Horsepower | 40 HP |
| High Pressure Coolant Pump | 15 HP |
| Electrics | 3/60/480V |
| Approx. Drill Dimensions | 188” x 48” x 72” Height |
| Approx. Coolant System Dimensions | 128” x 64” x 96” Height |
EQUIPPED WITH:
Operators Control Station with Spindle Pressure / Drill Monitor Load Meter. Spindle RPM Display. Spindle Variable Speed Controller. Feed IPM Thumb Wheel Selector. Manual and Automatic Operation Controls. Manual Operation Controls for Spindle Run. Coolant. Rapid Advance. Forward Feed, Retract, E-Stop, and Emergency Retract. Updated with Parker DC Spindle Speed Drive.
High-Pressure Coolant Filtration System with 7.5 HP Filter Pump that Removes Coolant from the bottom of the Settling Tank and Pumps it Through Filters into the Clean Coolant Top Tank. Micron Polishing Filtration with (2) Cartridge Type Filters. 15 HP Grundfos High-Pressure Coolant Pump. Chip Conveyor. Air-Oil Mist Lubrication to the Spindle. Automatic Way Lubrication System. Transformer.
32” x 72” T-Slotted Work Surface. Tailstock with Spring Loaded Cup Type Support. (3) Pressure Heads. Large Assortment of Spring Collets for Pressure Heads. (2) Drill Bush Heads with Large Assortment of Sleeves, Bushings, and Lock Nuts. Large Assortment of BTA Tubes (Some Extend for up to 96” Drilling). Large Assortment of BTA Drill Heads.
601 N. Skokie Hwy, Unit D
Lake Bluff , IL 60044
© 2024 Adams Machinery Company